Cheque cards

Embossing technology in the consumer industry


Embossing technology in the consumer industry

Underbody cover

Embossing technology in the automotive industry


Embossing technology in the automotive industry

Compression Moulding Technology

The term “injection-compression moulding“ means the introduction of thermoplastic polymer melt into a slightly opened mould with simultaneous or subsequent compressing by an additional clamping stroke. This additional clamping stroke can be accomplished via the machine or via a compression punch in the mould. The cavity pressure building up in the mould is distributed in two dimensions more uniformly over the projected component surface, usually with the aim of improving the accurate reproduction of surface detail and the dimensional stabil- ity of the components. Injection-compression moulding processes are low-pressure processes, so as to not damage inserts such as decorative film or metal inserts. Injection-compression moulding processes are low-pressure processes so that, for instance, decorative trim or metal inserts are protected. It is precisely in the case of light engineering applications that low injection and follow-up pressures minimize internal stresses and, thus, have a strong influence on the optical properties. A suitable injection moulding machine must therefore feature not only a high degree of flexibility, but rather also very precise and reproducible movements.

Mould techniques

Injection compression moulds are basically designed to prevent the leakage of melt to the mould parting line when the cavity is being filled in any compression moulding position (see Fig.).

a) positive mould b) compression injection frame c) compression injection backing plate d) die

Earlier shrinkage compensation

With injection compression moulding, what is called shrinkage compensation occurs much earlier in the process, and not merely via the fluid centre only, such as with standard injection moulding. This will provide for a mould filling level of 100% as early as in the first filling stage (see Fig.1).

Fig. 1

Uniform holding pressure across the surface

Another benefit of injection compression moulding is the more homogeneous shrinkage compensation across the surface and the resulting reduced holding pressure (Fig. 2).

Fig. 2